Products > Self-clinching studs > Studs

Studs

STUDS

TYPES

M-FH, M-FHS,

M-FHA, M-FH4,

M-TFH, M-TFHS, M-HFH, M-HFHS, M-HFHB, M-FHL, M-FHLS

Use the proven self-clinching design, install with a squeeze in punched or drilled round holes and become permanently mounted in the thin sheet.

Thread sizes #2 to 3/8” and M2.5 to M10.

MATERIALS AND FINISHES:

Type M-FH, M-FHL, M-TFH, M-HFH: heat-treated carbon steel, zinc plate

Type M-FHS, M-FHLS, M-TFHS, M-HFHS: 300 series stainless steel, passivation

Type M-FH4: 400 series stainless steel, passivation

Type M-HFHB: phosphor bronze QSn4-003, no finish

FOR USE IN SHEET HARDNESS:

Type M-FH, M-FHL, M-TFH, M-HFH: HV160 or less

Type M-FHS, M-FHLS, MTFHS, M-HFHS: HV130 or less

Type M-FH4: HV210 or less

Type M-HFHB: HV100 or less

THREAD SIZE AND LENGTH SELECTION DATA

TYPE M-FH, M-FHS (flush head studs)

TYPE M-TFH, M-TFHS (round head studs)

TYPE M-HFH, M-HFHB (high strength studs and phosphor bronze studs)

TYPE M-FHL, M-FHLS (self-clinching studs)

TYPE M-FH4 (self-clinching studs)

PERFORMANCE DATA

TYPE M-FH, M-FHS (flush head studs)

TYPE M-HFH, M-HFHS, M-HFHB (high strength studs and phosphor bronze studs)

TYPE M-FHL, M-FHLS (self-clinching studs)

TYPE M-FH4 (self-clinching studs)

TYPE M-TFH, M-TFHS (round head studs)